Details: TownSteel ED1300 Heavy Duty Grade 1 Concealed Vertical Rod Exit Device

1000 Series Exit Devices are designed for new or retrofit installation into other manufacturers' devices. The Push Bar assembly's smooth and reduced projection minimizes catch hazard. The device function is field selectable by adaptation with the selected type of trim. A full complement of lever trim is available in various architectural finishes. 1000 Series are made to comply with the highest safety and security standards in the industry. Devices and trims are UL/cUL listed for Panic Hardware or Fire Hardware. They are certified to ANSI/UL305 and ANSI/BHMA A156.3 Grade 1. 1000 Series provides superior durability for high-impact applications such as offices, schools, banks, assisted living facilities, and other institutions or commercial buildings.

The Delayed Egress Exit Device provides a controlled egress for openings which require panic or fire exit hardware for safe egress. It is a self contained exit device, when armed it will deny exit to unauthorized personnel for 15 or 30 seconds, while simultaneously sounding a local or remote audible alarm. The Remote Monitoring feature will alert the security personnel that an attempt is being made to exit the opening. After the 15 (or 30) second delay of egress period, the device will function as a standard exit device for safe egress.

Operation

The device secures the door in the locked mode with a red LED indicating locked status. Depressing the Push bar by accident or for less than the nuisance delay time will sound the alarm without initiating the alarm sequence. Depressing the Push bar with less than 15 pounds pressure, for longer than the nuisance delay time will initiate an irreversible local audible beeping tone and a visual Red indicator until the device releases. After the delay egress time, the lock releases and the alarm changes to a steady tone which continues to alarm until reset. The remote monitoring contact output can be used to alert security personnel.

ELR provides an ability to remotely retract the latchbolt. Continuous duty solenoid can retract Latch bolts under condition of unlatching or continually dogging. The ELR option can be applied with card readers, toggles or key switches, push buttons and fire alarm systems. PS100 power supply is required for the use of ELR option. UL/cUL Listed for Panic and Fire for Class 2 Circuitry. ELR is available with manual Flat/Hex Key for Panic Exit Devices.

Micro-switch Detecting Push Bar

The RX feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the Push Bar. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply.